The images of the products are informative and may show minor differences, depending on the batch and the supplier. It is possible that the specifications and the price of the products can be changed without notice. We do our best to add the most accurate and correct specifications to the product page, but it is possible that they are not completely correct. if you identify such a case, please report this to us.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the website.
5-32V automatic raise/lower power supply, LTC3780
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
Quality automatic step-up/step-down voltage source. Adjustable output. Maintains the output voltage regardless of variations in the input voltage;
Example: at a voltage set at 12V, it remains fixed when the voltage changes between 5 and 32V.
It can be used as the basis for building an adjustable laboratory source.
Quality protection.
Changeable protection fuse on the input.
High frequency and low resistance capacitors.
Constant voltage and current.
LED output error indicator in case of voltage variations, short circuit or other defects.
Supply voltage: 5 - 32 VDC
Output voltage: 1 - 30VDC, adjustable
Output current: 10A MAX, recommended under 8A, 6A for long term, adjustable
Output power: 80W, 130W peaks (above 80, improve cooling)
Ripple output: 50mV
Short circuit protection: Yes
Input polarity protection: No
Output polarity protection: No
Operating temperature: -45 ~ +85 ℃
Dimensions mm: 77.6*46.5*15mm (includes the aluminum cooling surface at the base).
Attention: if the "fault" LED stays on when the power is turned on, check the potentiometer next to the power supply ("low volt cutout"). It sets a fuse that stops the module under a certain voltage.