The images of the products are informative and may show minor differences, depending on the batch and the supplier. It is possible that the specifications and the price of the products can be changed without notice. We do our best to add the most accurate and correct specifications to the product page, but it is possible that they are not completely correct. if you identify such a case, please report this to us.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the website.
Arduino PLC Industrial Controller, A1-10MR, ATMega328, LCD1602
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
Arduino compatible industrial assembly, with DIP28 type ATMega328p processor, easy to replace, with plastic case with rail installation and connection via RS232 interface.
Wiring is easily done through the screw terminals. On the front, it has a 1602 LCD type display with backlight connected through the IIC interface.
It can be programmed through the Arduino IDE.
Specifications:
Supply voltage: 24VDC recommended (possible between 20 and 28V)
Microcontroller: DIP28 ATMega328, easily replaceable
Processor frequency: 16MHz
Flash memory: 32KB (0.5KB occupied by the bootloader)
SRAM: 2KB
EEPROM: 1KB
Logic voltage: 5V
Model: A1-10MR
Display: 1602 LCD
Programming: Arduino C - Arduino IDE
Analog Input: 0-10V default, 10 bit
Analogue channels: 3
Digital Input pins: 6 channels (NPN, active low)
Digital Output Pins: 4 channels
Output Type: Relay (x4)
Maximum Relay Current: 5A, AC/DC
I/O current: Max 40mA
Input signal: NPN
Communication method: RS232
Overall dimensions mm: 115 x 96 x 41mm
Arduino UNO ports 0-1-3, A0 and A5 are reserved.