The images of the products are informative and may show minor differences, depending on the batch and the supplier. It is possible that the specifications and the price of the products can be changed without notice. We do our best to add the most accurate and correct specifications to the product page, but it is possible that they are not completely correct. if you identify such a case, please report this to us.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the website.
Compatible development board Arduino Nano V3.0, ATMega328P-AU, FT232
Read the 4 reviews
INTERNATIONAL DELIVERYInternational fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
FAST DISPATCH 24HWe ship from our stock within 24H
DISCOUNT 5%All orders minimum 100€
Development board compatible with Arduino, NANO V3, ATmega328p. This board uses the same microcontroller used in the UNO boards, having the advantage of small dimensions and the presence of two analog inputs in addition to it. The characteristic of the total 8 analog pins (compared to 6 on the UNO) make this board the ideal choice in line-following robots that use 8 analog channels.
The difference between this board and its cheaper version, available on the site, is the use of the FT232 integrated.
The programming of the board is usually done through the Arduino IDE software, as a MiniUSB cable is required for communication with the computer.
The board is programmed with the "old bootloader" setting (it may vary depending on the batch).
The board can be powered directly at 5V through the USB port or on the VIN with a voltage between 5 and 12V (uses the AMS1117 5V voltage regulator).
Specifications:
Microcontroller: ATmega328p
USB converter: FT232
Operating voltage: 5 V
Input voltage (recommended): 8-12 V
Digital I/O pins: 14 (of which 6 PWM output pins)
Analog input pins: 8
Connection: mini USB
DC current on I/O pin: 40 mA
FLASH memory: 32 KB (ATmega328p)
Clock speed: 16 MHz
Dimensions mm: 43.2 x 17.8mm
Comparison between specifications:
Instructions:
To program the board, it is necessary to install the CH340 driver (see associated files).
The board comes with a preloaded bootloader. We prefer for the moment to use the old bootloader (before loading the code, select "ATMega328p old bootloader".
YOU CAN ORDER A MAXIMUM OF 4 PIECES PER ORDER. FOR LARGER QUANTITIES, PLEASE USE THE CONTACT PAGE.
You might also like
Customers who bought this product also bought:
Clock module, RTC, PCF8563
Multimeter XL830L
LED strip 12V 120 smd 2835, 1m
Gas Sensor MQ-4 Methane Natural Gas
Wheel 35mm by 7mm, engine N20
Mini drill set, 0.1-1.0mm, 10 pieces
Power bank kit 1S, 18650, 5V
Aluminum fludor pump
Guide axle support SK8
