Motor speed control module, PWM, 12-40VDC, 10A, Tenstar Robot
zoom_out_map
chevron_left chevron_right

The images of the products are informative and may show minor differences, depending on the batch and the supplier. It is possible that the specifications and the price of the products can be changed without notice. We do our best to add the most accurate and correct specifications to the product page, but it is possible that they are not completely correct. if you identify such a case, please report this to us.

The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the website.

Motor speed control module, PWM, 12-40VDC, 10A, Tenstar Robot

RON22.13
Tax included

Add to wishlist

You must be logged
  INTERNATIONAL DELIVERY

International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.

  FAST DISPATCH 24H

We ship from our stock within 24H

  DISCOUNT 5%

All orders minimum 100€

The rotation speed control module for DC motors, which uses the PWM method (Pulse with modulation) to work. Using the PWM method preserves the voltage and power reaching the motor, with the difference that it is delivered in pulses (from 10% to 100%), by changing the duty cycle. In this way, it will be possible to obtain a higher torque compared to the speed control method by decreasing the voltage.

It can control a motor with a maximum power of up to 400W and 10A (recommended under 8A).

The module is only compatible with brushed DC motors (it is not compatible with Brushless motors). There is no reverse polarity protection, which is why make sure the connection is correct so as not to burn the module. As a good practice, we recommend using modules with half of the specified maximum specifications.

It is recommended to monitor the temperature of the module, especially during the test phase, and to improve the cooling in case it overheats.

There is a glass fuse on the module as a measure of protection against excessive current (do not rely on the fact that the fuse will save the module in case of overcurrent, using it at the limit of the specifications for a long time will cause the module to burn) and a plug XH2.54 with 3 pins that can be used as an extension for an external potentiometer.

Specifications:

Supply voltage: 12 - 40VDC

Model: CCMHC, Tenstar Robot

Controlled power: 0.01 - 400W

Controlled current: 8A (Maximum 10A in short peaks)

Standby Current: 0.02A

PWM frequency: 13KHz

PWM duty cycle: 10 - 100%, adjustable by potentiometer

Dimensions mm: 60 x 55 x 28mm

Login:

9615

16 other products in the same category:

Customers who bought this product also bought: