The images of the products are informative and may show minor differences, depending on the batch and the supplier. It is possible that the specifications and the price of the products can be changed without notice. We do our best to add the most accurate and correct specifications to the product page, but it is possible that they are not completely correct. if you identify such a case, please report this to us.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the website.
Solenoid valve 12V, Water/Air, N/C, 1/2"
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
The electromagnetic valve that allows the circuit to open when a voltage of 12VDC is applied with the help of a solenoid.
The model is Normally Closed (opens when 12V voltage is applied).
It is not indicated for use in gravity fed systems.
Important: A circuit consisting of a resistor and a capacitor is recommended to prevent overheating of the solenoid valve. This requires a higher current only in the actuation phase of the electromagnet, so that for maintenance it consumes a much lower current. Prolonged use with a high current will lead to overheating and failure of the solenoid valve, which is not covered by the warranty!
Specifications:
Supply voltage: 12VDC
Recommended current: 0.6-1.5A
Connection size: 1/2"
Material: Metal + plastic
Pressure: 0.02-0.8Mpa
Maximum liquid temperature: 100°C
Operating mode: Normally Closed
Valve type: diaphragm
Use: water and liquids with reduced viscosity
Dimensions mm: 78 x 60mm
Inner diameter: 13.5mm
Outer diameter: 20mm
Flow characteristics:
0.02MPa: >3L/min
0.1MPa: 5L/min
0.3MPa: >10L/min
0.8MPa: <25L/min
Flow characteristics:
0.02MPa: >3L/min
0.1MPa: 5L/min
0.3MPa: >10L/min
0.8MPa: <25L/min
Cum este la 12V DC cand scrie alaturi 50/60Hz? Cred ca este la 12V AC....
Pompa este testata si functionala la 12V DC.