The images of the products are informative and may show minor differences, depending on the batch and the supplier. It is possible that the specifications and the price of the products can be changed without notice. We do our best to add the most accurate and correct specifications to the product page, but it is possible that they are not completely correct. if you identify such a case, please report this to us.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the website.
Adjustable voltage step-down module LM2596 DC-DC 4.5-40V 3A
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
Step Down Module DC-DC 4.5 - 40V 3A, LM2596S, adjustable. This is a step-down source capable of loads up to 3A, with adjustable direct current from the multi-turn potentiometer. Considering the fact that this potentiometer has a stroke of 25 turns, fine tuning of the output voltage can be precisely adjusted. This switching module keeps the output voltage even when the input voltage changes (a minimum voltage difference between input and output is still required).
The module integrates an LED that displays its operating status. it is connected in series with a 1kOhm resistor. If you set the module above 12V, we recommend removing the LED or changing the resistor with one with a higher value to avoid burning the LED and the resistor.
Specifications:
Input voltage: 3.20 - 40V
Output voltage: Adjustable, 1.25 - 35V
Output current: 2A, maximum 3A (active cooling required)
Operation: Buck
Efficiency: 92%
Frequency: 150KHz
Output ripple: 30mV (maximum)
Voltage regulator: +- 2.5%
Operating temperature: -40 - 85 degrees C
Dimensions mm: 43 x 21 x 14