The images of the products are informative and may show minor differences, depending on the batch and the supplier. It is possible that the specifications and the price of the products can be changed without notice. We do our best to add the most accurate and correct specifications to the product page, but it is possible that they are not completely correct. if you identify such a case, please report this to us.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the website.
Amplifier module 2x100W TDA7498
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
The TDA7498 module is a class D amplifier, with dual-BTL 100W+100W output, with single power supply, designed for home theater and active speaker applications.
Important : Using the amplifier with 4-ohm speakers may cause it to burn. If you still want to use 4 ohm speakers, use a voltage as low as possible and be careful of overheating the amplifier. If necessary, use active cooling by applying a fan to the radiator. Burning the module by using speakers with a value other than 8 ohms leads to the loss of the warranty.
Specifications:
Amplifier chip: TDA7498
Output power: 100W + 100W (Vcc = 36 V, RL = 6Ω, THD: 10%)
Output power: 80W+80W (Vcc = 34 V, RL = 8Ω, THD: 10%)
Supply voltage: 15 - 34VDC (recommended 24V)
Speaker impedance: 8 ohm recommended ( use with 4 ohm speakers may cause the amplifier to burn )
4 fixed gain values: 25.6dB, 31.6dB, 35.1dB and 37.6dB
Protection: short circuit and temperature
Functions: Normal, Stand-by and Mute. It is set by short-circuiting the pins in the picture below
Standby: circuits closed, low consumption mode
Mute: all signals connected to ground
Normal
Alternative Audio Input with 3 wires ( 3 pin audio Input ): Middle GND , outer pins L and R
Data sheet
- Type
- Amplifier
- tension
- AD
- Power
- Over 20W