The images of the products are informative and may show minor differences, depending on the batch and the supplier. It is possible that the specifications and the price of the products can be changed without notice. We do our best to add the most accurate and correct specifications to the product page, but it is possible that they are not completely correct. if you identify such a case, please report this to us.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the website.
Display LCD TFT 2.8", Touchscreen, STM32
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
TFT SPI color 240x320 LCD display with touch and SD Card slot on the back, compatible with ALIENTEK STM32 Mini, Elite, WarShip, Explorer and Apollo development boards.
Careful! 34-pin display. It is not directly attachable to Arduino boards (for the Mega board, compatible displays have 40 pins).
For more display details CLICK HERE
Specifications:
Supply voltage: 5V compatible, uses 3.3 or 5V, backlight 3.3V
Compatibility: STM32 and C51 platforms
Current consumption: 60 -70mAh
Touch type: resistive
Pixel arrangement: RGB vertical stripe
Driver IC: ILI9341
Backlight: white LED
Colors: 65K, 16-bit default, 8-bit selectable
Resolution (pixels): 240x320
Minimum IO pins: 4
Compatible with the 5110 interface
SD Card Adapter on PCB back
Inch dimensions: 2.8 inches
Screen dimensions mm: 57.6 x 43.2mm
Pen included: Yes
Total dimensions: 51 x 82.6mm
Number of pins: 34
Description Pins:
Number Pin Label Description
1 CS LCD reset control pin (low level enable)
2 r LCD register / data selection control pin (high level: register, low level: data)
3 WR LCD write control pin
4 RD LCD read control pin
5 RS LCD reset control pin (low level reset)
6 DB0 LCD data bus low 8-bit pin(When 8-bit parallel data bus mode is selected, the lower 8-bit data pins are not used)
7 DB1
8 DB2
9 DB3
10 DB4
11 DB5
12 DB6
13 DB7
14 DB8 LCD data bus high 8-bit pin
15 DB9
16 DB10
17 DB11
18 DB12
19 DB13
20 DB14
21 DB15
22 SDCS SD card selection control pin (used when using the SD card expansion function, this test program is not used)
2. 3 BL LCD backlight control pin (High level light)
24 VDD Module power positive pin (module has integrated voltage regulator IC, so the power supply can be connected to 5V or 3.3V)
25 VDD
26 GND Module power ground pin
27 GND
28 NC Undefined, reserved
29 MISS Touch screen SPI bus data input pin
30 DAWDLE Touch screen SPI bus data output pin
31 PEN Touch screen interrupt detection pin (Low level when a touch occurs)
32 F_CS Flash chip select control pin (used when using the Flash extension function, this test program is not used)
33 T_CS Touch screen IC chip select control pin (Low level enable)
34 CLK Touch screen SPI bus clock control pin