The images of the products are informative and may show minor differences, depending on the batch and the supplier. It is possible that the specifications and the price of the products can be changed without notice. We do our best to add the most accurate and correct specifications to the product page, but it is possible that they are not completely correct. if you identify such a case, please report this to us.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the website.
Inductive proximity sensor SN04-P, NO, 6-36V, PNP
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
Inductive sensor, PNP, SN04, with 3 wires, which detects the proximity of a metal surface through the principle of induction.
It can detect up to a distance of 5mm, depending on the type of surface and its shape.
It can also be used for detection through thin non-metallic surfaces.
It has a red LED that lights up when a metal object is near.
The sensor is of the Normal Open type: the supply voltage will be present on the signal wire if there is no metallic surface in contact; the voltage will drop close to 0 in the absence of contact with the metal surface.
Specifications:
Supply voltage: 6 - 36V
Type: PNP
Current consumed: 5mA max
Detection distance: max 5mm
Output voltage: 6 - 36V (depending on the supply voltage)
Operation: Normally Open (Normally Open, NO)
Water and dust resistance class: IP67
LED indicator: Red, lit when ignition is closed
Dimensions mm: 18.2 x 17.5 x 34mm
Wire length: 1m
Mounting holes: 3.2mm x 8.3mm, hole depth 8.7mm
Content:
1 x Sensor
1 x Assembly set (screws, washers, nuts), included depending on the lot
Instructions:
Brown wire: Power supply 6 - 36VDC
Blue wire: GND
Black Wire: Output